Commercial Roofing Fabrication Services in DFW & Surrounding Areas

Flashing, Coping, Drip Edge, and Custom Roofing Metal

A Fabrication Partner Built Around Your Schedule

Supporting Commercial Roofing Contractors

TriPoint Fabrication is a Cedar Hill, Texas, metal shop that fabricates roofing metal for commercial roofing contractors across the Dallas-Fort Worth metroplex and surrounding North Texas. We do not install roofs. We build the flashing, coping, edge metal, and custom components your crews need on the deck, cut and formed to your specs and ready for the field. Commercial roofing runs on tight schedules, and a late or out-of-spec flashing package stalls the whole job. Our shop is set up to keep that from happening: real quotes back fast, parts built to print, and delivery on the date we commit to. Prints in, parts out, on time, built right.

13 Years of Expierence

We know our market because we work in it.

Most of our business is repeat work from commercial clients who have learned that a shop they can actually reach, on a project that actually delivers on time, is worth more than the cheapest bid. What that means for you is simple. When you send us a print, you get a real quote back fast. You get a real shop foreman who answers the phone. You get a finished part that fits the first time. Our welders carry AWS and ASME certifications, and we are actively pursuing ISO 9001 certification to formalize the quality systems we already run day to day.

Flashing, Coping, Edge Metal, and Custom Transitions

Roofing Components We Fabricate

Roofing flashing fabrication is the core of this work. Every piece is a custom roofing metal component built to your drawings and labeled for field installation, so your crew installs rather than cutting and fitting on the deck. We fabricate the roofing-specific sheet metal components that tie a roof assembly together:

Roof flashing systems

Base, step, and through-wall flashing fabricated to your roof detailing.

Counter flashing and wall flashing

Formed to integrate with the wall and roof transition on your assembly.

Coping and parapet caps

Custom-formed caps in the profiles and lengths your parapets call for.

Drip edge and edge metal

Roof edge and termination metal cut and formed for a clean, weather-tight perimeter.

Roof penetration flashing

Custom flashing for curbs, pipes, and other roof penetrations.

Custom transition pieces

One-off transitions and termination details that off-the-shelf metal does not cover.

Get a Quote on Your Glazing Project

Talk to Our Team About Your Project

Custom-Formed Cladding and Roofing Panels

Roof Cladding & Metal Roofing Systems

Beyond flashing and trim, roof cladding fabrication covers the weather-facing metal that protects and finishes a roofline: exterior cladding panels, custom-formed roofing panels, and the functional metal systems that close out a roof assembly. We craft each panel to your profile and project specs so it integrates with the roof system rather than fighting it. For design-driven façade and feature metal that is not part of the roof assembly, see our [Commercial Architectural Metal page].

Fabrication Capabilities Supporting Roofing Projects

Our roofing work runs on the same CNC-driven shop floor as the rest of our fabrication: CNC laser and plasma cutting for clean profiles, precision brake forming for accurate bends, and punching, notching, welding, and assembly as required. For volume cut work, see our [CNC Laser Cutting page]; for weldments, see [Commercial Welding & Fabrication]. On a roofing job, these capabilities serve one goal: components that match the spec and install the first time.

What Roofing Contractors Ask Most

Commercial Roofing Fabrication FAQ

Commercial roofing fabrication is the cutting, forming, and finishing of sheet metal into the components a commercial roof assembly needs, including flashing, coping, drip edge, edge metal, and custom transition pieces. The parts are built to a contractor’s drawings and delivered ready to install.

Flashing systems, counter and wall flashing, coping and parapet caps, drip edge and edge metal, roof penetration flashing, custom transition pieces, and formed roofing panels. If your job needs a custom roofing metal component, we can fabricate it to spec.

Yes. Custom flashing and coping are core to our roofing work. We form them to your profiles, lengths, and material specs, and label them for field installation so your crew can install them without refabricating on the deck.

Galvanized steel, aluminum, stainless steel, pre-finished and color-matched sheet metal, and specialty architectural roofing metals, in the gauges and coatings commercial roofing typically calls for.

Yes. Commercial roofing contractors across the Dallas-Fort Worth metroplex and surrounding North Texas are our core customers. We fabricate to your specs and deliver jobsite-ready metal.

Yes. Custom roof edge, termination, and transition metal is routine work for us. Send us the details, and we will fabricate it to fit your assembly.

Galvanized, Aluminum, Stainless, and Pre-Finished Metal

Materials Used in Roofing Fabrication

If your spec calls for a specific gauge, coating, or color match, let us know up front, and we will confirm whether we can source it. Roofing metal has to withstand weather, so the material and finish matter as much as the cut. We fabricate roofing components in:

Stainless Steel

For corrosion-critical details and longer-life assemblies.

Aluminum

Lightweight and corrosion-resistant for cladding and trim.

Pre-finished sheet metal

Color-matched and coated stock for coping, fascia, and visible edge metal.

Architectural Roofing Metals

Specialty profiles and finishes for rooflines where appearance matters.

Components That Fit, Schedules That Hold

Benefits of Working With a Roofing Fabrication Partner

The result is a roofing metal package that lands ready to install on the date you planned around. Roofing contractors bring fabrication to a partner shop for reasons that show up on the schedule and the budget:

Faster turnaround

Parts are produced to your timeline, so the deck is never waiting on metal.

Accurate custom fit

Components built to your drawings, which means fewer modifications on the roof.

Reduced on-site cutting

Your crew installs rather than fabricates in the field.

Consistent production quality

Repeatable parts across a long run or a multi-building project.

Scalable capacity

Short custom runs and high-volume orders are handled on the same floor.

Dallas Texas | Tripoint Fabrication

Roofing Metal, Built to Spec and Delivered on Time 

Your Commercial Roofing Fabrication Partner in DFW

We work with commercial roofing contractors and the construction teams around them, across the Dallas-Fort Worth metroplex and surrounding North Texas, fabricating roofing metal to spec and getting it to the jobsite when the deck needs it.

Commercial roofing contractors are our core customers, along with the general contractors, commercial construction firms, building envelope contractors, and architectural firms coordinating on the same projects. Where roof and envelope details meet, we coordinate with waterproofing teams; for that scope, see our Commercial Waterproofing page.

There is no shortage of shops that can bend metal. Here is what the contractors we work with point to:

  • We know roofing details. Our brake operators understand flashing, coping, and edge metal, and they fabricate parts that install cleanly the first time.
  • Reliable production timelines. We quote fast, schedule realistically, and hit the dates we commit to.
  • Custom fabrication at any volume. From a single transition piece to a full edge-metal package for a large commercial roof.
  • Quality that repeats. CNC-controlled cutting and forming, AWS and ASME certified welding, and ISO 9001 certification in progress.
  • Commercial contractor experience. Most of our work is repeat business from contractors who come back because the metal fits and the dates hold.

 

North & East DFW

Irving, Dallas, Richardson, Garland, Mesquite, Plano, Frisco, McKinney, Denton

South & West DFW

Grand Prairie, Arlington, Fort Worth, Mansfield, Cedar Hill, DeSoto, Duncanville, Waxahachie, Ennis, Corsicana

Central Texas Reach

Projects through Waco and the I-35 corridor.

Built to Your Prints, Ready for the Deck

Custom Sheet Metal for Roofing Applications

When a job calls for something outside the standard catalog, we fabricate custom sheet metal for roofing applications to your prints. This is commercial roofing sheet metal fabrication built to the job, not stock parts adapted to fit: CNC-cut components, precision-formed profiles, and project-specific pieces produced at the volume your job requires. Whether you need a short run of a custom transition or a high-volume order of edge metal for a large commercial roof, our shop scales to the job. For the forming process behind these parts, see our [Commercial Brake Metal page]; here, the focus stays on roofing-ready components.